Many people have complemented me on my animations including Potter
who said "It's amazing how well and how fast he does graphics."
Whilst I appreciate such comments, it should be said that I do not
produce quickly. Much thought goes into each animation and it
is a long, painstaking process. Do not be misled into thinking
I can produce fast or well. I do try to produce well, but fast? No.
This animation has several faults which are only apparent from
the angle shown, you would not see them from a side-on view:
http://www.androcles01.pwp.blueyonder.co.uk/loco2.gif
Also it took about 40 hours to make, spread over 3 days.
I take great pains with fine detail, but after 40 hours of industrious
endeavour some blunders are bound to slip past me, I am not perfect.
There are mistakes and they are not deliberate mistakes, but is
it worth the effort to redraw 24 frames? Only if you spot them
easily.
The same is true for you. If you were honest with yourself
and look at what you produce from a different point of view
you'd see your own blunders. Some of you try to mask them
and bluster how right you are, and you convince yourselves.
In reality you are fooling yourselves.
Those amongst you that glorify Einstein haven't seen the blunders
he made, you are blind and dishonest fools. Your problem, not mine.
Remember this: Genius is 10% inspiration and 90% perspiration.
Androcles.
Mensanator - 15 Jul 2008 02:26 GMT
> Many people have complemented me on my animations including Potter
> who said "It's amazing how well and how fast he does graphics."
[quoted text clipped - 23 lines]
>
> Remember this: Genius is 10% inspiration and 90% perspiration.
Ha! Anybody can make a drawing.
<http://members.aol.com/rotanasnem/lego.htm>
> Androcles.
Androcles - 15 Jul 2008 09:54 GMT
On Jul 14, 7:49 pm, "Androcles" <Headmas...@Hogwarts.physics> wrote:
> Many people have complemented me on my animations including Potter
> who said "It's amazing how well and how fast he does graphics."
[quoted text clipped - 23 lines]
>
> Remember this: Genius is 10% inspiration and 90% perspiration.
Ha! Anybody can make a drawing.
<http://members.aol.com/rotanasnem/lego.htm>
=================================================
Yep... and every idiot has a theory.
hhc314@yahoo.com - 16 Jul 2008 03:31 GMT
> Many people have complemented me on my animations including Potter
> who said "It's amazing how well and how fast he does graphics."
[quoted text clipped - 25 lines]
>
> Androcles.
Hate to tell you this guy, but you beautiful illustration is seriously
incorrect.
It depicts a hard linkage between two wheels of differenct diameters
that obviously would not rotate at the same rate.
Keep your day job.
Harry C.
Spaceman - 16 Jul 2008 05:32 GMT
> Hate to tell you this guy, but you beautiful illustration is seriously
> incorrect.
>
> It depicts a hard linkage between two wheels of differenct diameters
> that obviously would not rotate at the same rate.
Harry,
You know I am a good mechanic so I must tell you this.
his "graphic" might be off a bit or it might be a perspective thing.
(you know that further away wheel only "looks" smaller.
anyway..
I can assure you a hard linkage like shown and connected at the
correct radius point on each wheel, can make 2 different sized
wheels roll at the same speed.

Signature
James M Driscoll Jr
Spaceman
Spaceman - 16 Jul 2008 06:42 GMT
Spaceman wrote:
> hhc314@yahoo.com wrote:
>> Hate to tell you this guy, but you beautiful illustration is
[quoted text clipped - 12 lines]
> correct radius point on each wheel, can make 2 different sized
> wheels roll at the same speed.
^^^^
Oh dang, I just realized I said that completely wrong.
My "very" bad.
I meant to say two different sized wheels with a hard linkage
can rotate at the same revs.. but of course you could not
get them to "roll" at the same rate..
My bad..
anyways..
The picture shown only has a perspective problem,
not a rolling problem.
Sorry about the "stupid response extra" part Harry.
I must be too tired
At least I caught it before I fell asleep completely.
:)

Signature
James M Driscoll Jr
Spaceman